Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download

Page: 392 / 474

391

Practical hints

Unlocking/locking in an emergency

Locking

왘

Insert the mechanical key into the
driver’s door lock until it stops.

왘

Turn the mechanical key clockwise to
position

The driver’s door is locked.

Fuel filler flap

In case the central locking system does
not release the fuel filler flap, you can open
it manually.

The release button is on the right-hand
side of the luggage compartment behind
the side trim.

Side trim

Release button

왘

Open the trunk.

왘

Remove the side trim

from the

right-hand side of the luggage compart-
ment.

왘

Turn release button

clockwise as far

as will go.

The fuel filler flap is released.

왘

Open the fuel filler flap from outside.

Warning!

If you operate the emergency release but-

ton, be careful of the sharp edges so that

you do not injure yourself.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands