Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download

Page: 58 / 474

Getting started

Parking and locking

왔

Parking and locking

You have now completed your first drive.
You have properly stopped and parked
your vehicle. End your drive as follows.

Warning!

Vehicles with manual transmission:

Wait until the vehicle is stationary before

removing the SmartKey from the starter

switch. The vehicle cannot be steered when

the SmartKey is removed.

Warning!

With the engine not running, there is no

power assistance for the brake and steering

system. In this case, it is important to keep

in mind that a considerably higher degree of

effort is necessary to brake and steer the

vehicle.

Warning!

Do not park this vehicle in areas where com-

bustible materials such as grass, hay or

leaves can come into contact with the hot

exhaust system, as these materials could be

ignited and cause a vehicle fire.

To reduce the risk of personal injury as a re-

sult of vehicle movement, before turning off

the engine and leaving the vehicle always:

앫

Keep right foot on brake pedal.

앫

Manual transmission: Move the gear-
shift lever to neutral position (no gear is
selected).

앫

Firmly depress parking brake pedal.

앫

Automatic transmission*: Move the
gear selector lever to position

앫

Slowly release brake pedal.

앫

When parked on an incline, turn front
wheels towards the road curb.

앫

Turn the SmartKey in the starter switch
to position

and remove the SmartKey

from the starter switch.

앫

Take the SmartKey and lock the vehicle
when leaving.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands