Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download

Page: 244 / 474

243

Controls in detail

Power windows

Summer opening feature

If the weather is warm, you can ventilate
the vehicle before driving off by simulta-
neously:

앫

opening the side windows

앫

opening the tilt/sliding sunroof*

왘

Aim transmitter eye at the driver’s door
handle. The SmartKey must be in close
proximity to the door handle.

왘

Press and hold button

until the

windows and the tilt/sliding sunroof*
have reached the desired position.

왘

Release button

to interrupt proce-

dure.

Convenience closing feature

왘

Aim transmitter eye at the driver’s door
handle. The SmartKey must be in close
proximity to the door handle.

왘

Press and hold button

‹

until the

windows and the tilt/sliding sunroof*
are completely closed.

왘

Release the

‹

button to stop

procedure.

Make sure all windows and the tilt/sliding
sunroof* are properly closed before leav-
ing the vehicle.

Warning!

When closing the windows and the tilt/slid-

ing sunroof*, make sure that there is no

danger of anyone being harmed by the clos-

ing procedure.

If potential danger exists, proceed as fol-

lows:

앫

Release button

‹

to stop the closing

procedure. To open, press and hold
button

. To continue the closing

procedure after making sure that there
is no danger of anyone being harmed by
the closing procedure, press and hold
button

‹

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands