Mercedes-Benz 2006 C 230 Sport Page 355 Operator'S Manual Download

Page: 355 / 474

354

Practical hints

What to do if …

Problem

Possible cause/consequence

Suggested solution

The yellow ESP

warning lamp

comes on while driving.

The ESP

is deactivated.

Risk of accident!

Adapt your speed and driving to the
prevailing road, weather and traffic
conditions.

왘

Switch the ESP

back on (

컄

page 89).

If the ESP

cannot be switched back on,

have the system checked at an autho-
rized Mercedes-Benz Center as soon as
possible.

The yellow ESP

warning lamp

flashes while driving.

The ESP

or traction control has come into

operation because of detected traction loss
in at least one tire.

왘

When driving off, apply as little
throttle as possible.

왘

While driving, ease up on the
accelerator.

왘

Adapt your speed and driving to the
prevailing road and weather
conditions.

왘

Do not deactivate the ESP

Exceptions: (

컄

page 89).

Failure to follow these instructions
increases the risk of an accident.

The yellow fuel tank reserve
warning lamp in the fuel gauge
(

컄

page 24) comes on while

driving.

The fuel level has gone below the reserve
mark.

왘

Refuel at the next gas station
(

컄

page 294).

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands