Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download Page 115

Page: 115 / 474

114

Controls in detail

Seats

The red indicator lamps

in the switch

show the heating level selected.

왘

Switch on the ignition (

컄

page 33).

Switching on seat heating

왘

Press switch

once.

Three red indicator lamps

in the

switch come on.

왘

Continue pressing switch

until

desired seat heating level is reached.

Switching off seat heating

왘

Press switch

repeatedly until all

indicator lamps

go out.

Level

Three indicator lamps on
(highest level).

After approximately 5 minutes,
seat heating is automatically
switched to level

Two indicator lamps on.

After approximately 10 minutes,
seat heating is automatically
switched to level

One indicator lamp on (lowest
level).

After approximately 20 minutes,
seat heating is automatically
switched off.

off

No indicator lamp on.

If one or more of the indicator
lamps

on the seat heating switch

are flashing, there is insufficient volt-
age due to too many electrical consum-
ers are turned on. The seat heating
switches off automatically.

The seat heating will switch back on
again automatically as soon as
sufficient voltage is available.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Brands by name

Popular brands