Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download

Page: 51 / 474

Getting started

Driving

Starting difficulties

If the engine does not start as described,
carry out the following steps:

왘

Turn the SmartKey in starter switch to
position

and repeat the starting

procedure (

컄

page 48).

Remember that extended starting
attempts can drain the vehicle battery.

왘

Get a jump start (

컄

page 415).

If the engine does not start after several
starting attempts, there could be a mal-
function in the engine electronics or in the
fuel supply system.

왘

Notify an authorized Mercedes-Benz
Center.

Parking brake

Release handle

Parking brake pedal

왘

Release parking brake by pulling on
handle

The warning lamp

;

(USA only)

(Canada only) in the

instrument cluster goes out.

Warning!

When leaving the vehicle, always remove the

SmartKey from the starter switch, take it

with you, and lock the vehicle. Do not leave

children unattended in the vehicle, or with

access to an unlocked vehicle. Children

could release the parking brake, which

could result in an accident and/or serious

injury.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands