Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download

Page: 320 / 474

319

Operation

Tires and wheels

왘

Switch on the ignition (

컄

page 33).

The standard display menu appears in
the multifunction display (

컄

page 135).

왘

Press button

repeatedly

until the following message appears in
the multifunction display:

Run Flat Indicator
active
Reactivation possible: +

왘

Press button

The following message will appear in
the multifunction display:

Tire pres. OK now

If you wish to confirm activation:

왘

Press button

The following message will appear in
the multifunction display:

Run Flat Indicator
Reactivated

After a certain “learning phase”, the Run
Flat Indicator checks the set pressure
values for all four tires.

If you wish to cancel activation:

왘

Press button

왘

Wait until the message

Tire pres. OK now?

disappears.

Potential problems associated with
underinflated and overinflated tires

Underinflated tire inflation pressure

Underinflated tires can:

앫

cause excessive and uneven tire wear

앫

adversely affect fuel economy

앫

lead to tire failure from being
overheated

앫

adversely affect handling
characteristics

Warning!

The Run Flat Indicator* can only warn you in

a reliable manner if you have set the correct

tire inflation pressures for each tire.

If an incorrect tire inflation pressure was

set, the system will monitor the pressure

according to the incorrect value.

Warning!

Follow recommended tire inflation pres-

sures.

Do not underinflate tires. Underinflated tires

wear excessively and/or unevenly,

adversely affect handling and fuel economy,

and are more likely to fail from being

overheated.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands