Mercedes-Benz 2006 C 230 Sport Page 50 Operator'S Manual Download

Page: 50 / 474

Getting started

Driving

Starting

왘

Depress brake pedal.

왘

Make sure the gearshift lever is in
neutral position (no gear selected).

왘

Fully depress clutch pedal.

Otherwise the engine cannot be
started due to the integrated safety
interlock.

왘

Do not depress the accelerator.

왘

Turn the SmartKey in the starter switch
to position

(

컄

page 33) and hold until

the engine starts.

For information on turning off the engine,
see “Turning off engine” (

컄

page 59).

Automatic transmission*

Gearshift pattern for automatic
transmission

Park position with gear selector lever
lock

Reverse gear

Neutral position

Drive position

For more information, see “Automatic
transmission*” (

컄

page 162).

Starting

왘

Place the gear selector lever in
position

왘

Do not depress the accelerator.

왘

Turn the SmartKey in the starter switch
to position

(

컄

page 33) and release it

again immediately. The engine then
starts automatically.

For information on turning off the engine,
see “Turning off engine” (

컄

page 59).

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands