Mercedes-Benz 2006 C 230 Sport Page 161 Operator'S Manual Download

Page: 161 / 474

160

Controls in detail

Manual transmission

Manual transmission is standard
equipment on select models and not
available on all models.

For information on driving with a manual
transmission, see “Manual transmission”
(

컄

page 48).

Warning!

For vehicles equipped with a manual trans-

mission, getting out of your vehicle with the

gearshift lever not engaged in first or

reverse gear and parking brake engaged is

dangerous.

Also, when parked on an incline, an engaged

first or reverse gear alone may not prevent

your vehicle from moving, possibly hitting

people or objects.

Always set the parking brake in addition to

engaging first or reverse gear (

컄

page 58).

When parked on an incline, turn front wheels

towards the road curb.

Do not park this vehicle in areas where

combustible materials such as grass, hay or

leaves can come into contact with the hot

exhaust system, as these materials could be

ignited and cause a vehicle fire.

Warning!

When leaving the vehicle, always remove the

SmartKey from the starter switch, take it

with you, and lock the vehicle. Do not leave

children unattended in the vehicle, or with

access to an unlocked vehicle. Children

could move the gearshift lever, which could

result in an accident and/or serious injury.

Warning!

On slippery road surfaces, never downshift

in order to obtain braking action. This could

result in drive wheel slip and reduced

vehicle control. Your vehicle’s ABS will not

prevent this type of loss of control.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands