Mercedes-Benz 2006 C 230 Sport Operator'S Manual Download

Page: 348 / 474

347

Operation

Vehicle care

Hard plastic trim items

왘

Use Mercedes-Benz approved Interior
Care, a soft, lint-free cloth and apply
with light pressure.

Steering wheel and gear selector lever

왘

Wipe with a damp cloth and dry thor-
oughly or clean with Mercedes-Benz
approved Leather Care.

Carpets

왘

Use Mercedes-Benz approved Carpet
and Fabric Care for cleaning the car-
pets.

Headliner and shelf below rear window

왘

Use a soft bristle brush or a dry-sham-
poo cleaner in case of excessive dirt.

Seat belts

왘

Only use clear, lukewarm water and
soap.

To prevent scratches, do not use scour-
ing agents.

The webbing must not be treated with
chemical cleaning agents. Do not dry
the webbing at temperatures above
176°F (80°C) or in direct sunlight.

Warning!

Do not bleach or dye seat belts as this may

severely weaken them. In a crash they may

not be able to provide adequate protection.

Summary of Contents for 2006 C 230 Sport



























































































































































































































































































































































































































































































Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands

Mercedes-Benz 2006 C 230 Sport, Operator'S Manual

Search results

Summary of Contents for 2006 C 230 Sport

Reviews:

Related manuals for 2006 C 230 Sport

Brands by name

Popular brands