- 35 -
The contents of DRIVE DATA3 WRITE PORT are as follows.
DATA3 PORT
7
0
D
D
COMP2 INT ENABLE
COMP2 STOP TYPE
COMP3 INT ENABLE
COMP3 STOP TYPE
COMP4 INT ENABLE
COMP4 STOP TYPE
COMP5 INT ENABLE
COMP5 STOP TYPE
The details of each bit are shown below.
The bit is set to the underlined side at POWER ON/RESET.
(1) COMP2 INT ENABLE (D )
0
Determines whether or not to output the match output CNTINT of COMPARE REGISTER2.
0: CNTINT is not output.
1: CNTINT is output.
(2) COMP2 STOP TYPE (D )
1
Determines whether or not to put the pulse output into stop by the match output of COMPARE REGISTER2.
0: Not put into stop.
1: Put into stop.
(3) COMP3 INT ENABLE (D )
2
Determines whether or not to output the match output XCNTINT of COMPARE REGISTER3.
0: XCNTINT is not output.
1: XCNTINT is output.
(4) COMP3 STOP TYPE (D )
3
Determines whether or not to put the pulse output into stop by the match output of COMPARE REGISTER3.
0: Not put into stop.
1: Put into stop.
(5) COMP4 INT ENABLE (D )
4
Determines whether or not to output the match output XCNTINT of COMPARE REGISTER4.
0: XCNTINT is not output.
1: XCNTINT is output.
(6) COMP4 STOP TYPE (D )
5
Determines whether or not to put the pulse output into stop by the match output of COMPARE REGISTER4.
0: Not put into stop.
1: Put into stop.
(7) COMP5 INT ENABLE (D )
6
Determines whether or not to output the match output XCNTINT of COMPARE REGISTER5.
0: XCNTINT is not output.
1: XCNTINT is output.
(8) COMP5 STOP TYPE (D )
7
Determines whether or not to put the pulse output into stop by the match output of COMPARE REGISTER5.
0: Not put into stop.
1: Put into stop.
Summary of Contents for C-875
Page 98: ... 98 2 M TYPE 3 H TYPE ...