SAFETY PRECAUTIONS
(Continued)
The following are some specific safety related items associated with the
MPRT test system.
Always start with the power OFF, before connecting the power cord.
Make sure outputs are off before attempting to make test
connections.
Always use properly insulated test leads. The test leads supplied
with the unit are rated for the continuous output ratings of the test
system, and should be properly used and cared for. DO NOT use
cracked or broken test leads.
Always turn the test system off before disconnecting the power cord
or removing / inserting output modules. Turn the power off when
removing or inserting the Voltage / Current module(s).
DO NOT power up without the modules secured in their respective
slot.
DO NOT attempt to use the unit without a safety ground connected.
DO NOT attempt to use the unit if the power cord ground prong is
broken or missing.
Under no circumstances should the operator put their hand or
tools inside the test system chassis area with the test system
connected to a power source. Lethal voltages are present and
may cause serious injury or death!
5
www
. ElectricalPartManuals
. com