Technical Manual Presence Detector SCN-P/G360XX.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
50
50
Send condition
At input telegram
At output change
Send only 0 at output
change
Send only 1 at output
change
Send only 0 at input
telegram
Send only 1 at input
telegram
Setting the Sending Condition:
At input telegram:
The output value is
sent with every input telegram,
regardless of whether the output value
has changed or not
At output change:
The output value is
only sent if the output has changed.
Send only 1 at output change:
The
output value is only sent if the output
changes and the logic has the
corresponding value (0/1).
Send only 0/1 at input telegram:
Output value is sent with each input
telegram if the logic has the
corresponding value (0/1)
Output
normal
inverse
Defines how the output object is sent.
Internal Input A/B
not active
normal
inverse
Activation of an internal object as logic
input
Object number
0-99
[0]
Selection of the internal object -
Attention:
Only bit values are
evaluated correctly!
External Input C-F
not active
normal
inverse
Activation of an external object as logic
input
Initialize logig
i put ith…
after reset
Value 0
Value 1
Setting of a preassignment of the logic
after a bus voltage recovery
Table 27: Parameter settings - logic function
Different objects can be logically linked using the logic function. Each logic function can link and
evaluate up to 2 internal objects and up to 4 external objects. The transmission behaviour of the
output can be adapted via the sending condition.
The following table shows the corresponding communication objects for Logic 1 (5):
Number
Name
Length
Usage
80
Logic 1
–
Input C
1 Bit
External Input for the logic function
81
Logic 1
–
Input D
1 Bit
External Input for the logic function
82
Logic 1
–
Input E
1 Bit
External Input for the logic function
83
Logic 1
–
Input F
1 Bit
External Input for the logic function
84
Logic 1
–
Output 1
1 Bit/
2 Bit/
1 Byte
Output of the logic function; size and DPT
dependent on the parameter Output object
Table 28: Communication objects - Logic