Technical Manual Presence Detector SCN-P/G360XX.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
8
8
2.5 Functions
The functions of the presence detector are divided in the areas general settings, settings for the light
control, the sending behavior and the calibration for the brightness value, settings for logic,
activation of LED, settings for scenes and, according to the the hardware type, the constant light
control.
The following menus are shown and can be parametrized further:
General setting
The general settings are used for basic configuration of the presence detector. Here, the
usage of the day/night object (separate switching objects for day/night), basic settings of
sensitivity and brightness, forced control as well as release of external push-button input are
set.
Channel selection
Up to four light groups, one HCV and one alarm group can be activated here.
o
Light groups 1/2/3/4
(Only 3 light groups possible for models with only 3 sensors).
Settings for presence operation can be made here. In this menu, active sensors, the
operating mode of the detector, forced control or lock object, the sending conditions,
the follow-up time and external push-button inputs can be defined.
o
HCV
The Heating-, Ventilation-, Climate-channel is the interface of the presence detector
to other subsections. In contrast to the light channels, the HCV channel has
adjustable observation windows with which the presence in the room can be
monitored. By using this channel you can, for example, control the ventilation of a
room as required or switch other HCV functions in presence/absence.
o
Alarm
The alarm channel is used to recognize and detect movements during absence. For
this purpose, the channel has a separate sensitivity setting and its own enable/lock
object with which monitoring can be started. Like the HCV channel, the alarm
channel also provides adjustable observation windows.
LED
Here you can set whether and for which light channel the green LED is active
Scenes
Up to 8 scenes with different settings for light channels 1-4 can be activated here
Brightness
Settings for the sending of the measured brightness value and a treshold value can be
adjusted here.
Calibration of brightness value
The correction of the measured brightness value can be adjusted by a steady parameter or
via the Teach-In object.
