Technical Manual Presence Detector SCN-P/G360XX.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
6
6
The following figure shows the adjustment of the particular sensors, identified with S1=sensor 1 to 3 ,
for the presence detector with 3 pyro sensors. The LEDs are marked with R for the red LED and G for
the green LED. The bus connector is marked with BC:
Figure 3: Position of the sensors and LEDs
–
SCN-P/G360X3.02
The presence detector should be placed in the middle of the room. It is important for the constant
light control to install the detector in a minimum distance of 60 cm to the next lamp and in the line of
the middle light band.
The following figures show the detection area of the presence detectors:
Figure 4: Detection area SCN-P360x4.02