Technical Manual Presence Detector SCN-P/G360XX.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
52
52
4.11 Miscellaneous/Application examples
In this chapter some suggestions / application possibilities of the presence detector are presented.
However, the respective examples are only suggestions and may have to be adapted to the current
situation.
4.11.1 Blackboard light via 2
nd
light channel
A presence detector for classroom lighting is used to switch the light in a classroom according to
demand. However, since additional table light is often required in school and conference rooms, a
2nd lighting group is used here. However, this panel light only needs to be switched on on request
and switched off automatically when the teacher/lecturer leaves the panel area. Only one detector is
required for smaller rooms. For larger rooms, the use of a second detector as a slave can be useful.
The first presence detector for the blackboard light has to be parameterized as follows:
Selection of lightgroups:
2 light groups
1.
light group:
Operating mode:
fully automatic
Active sensors:
1234
other parameters:
according to usage
2.
light group:
Operating mode:
semi automatic
Active sensors:
1234
other parameters:
according to usage
The output objects of the light group need to be connected to the switching objects of these light
groups.
The o je t e ter al i put of the se o d light group eeds to e o e ted to the push utto ,
which sends the requirement for the blackboard light. The push button has to send an 1-signal to the
object.
