Technical Manual Presence Detector SCN-P/G360XX.02
MDT technologies GmbH •
51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-
880 •
Fax: +49-2263-4588
• [email protected] • www.mdt.de
40
40
4.8 Constant light control
Only for detectors with constant light control: SCN-P360K3.02, SCN-P360K4.02, SCN-G360K3.02
With the new proportional master/slave constant light control it is possible to regulate the light in
the room intelligently, so that external influences can be almost completely regulated out. By
controlling up to 3 light strips, wall, centre, window, the light in the room can be kept constant
despite the influence of sunlight and other light sources. With the intelligent control, constant light
control helps to save energy.
Note: The light group selection should be set to 1 light group or 1 light group + HCV. Constant lighting
control with 2 lighting groups (zones) does not make sense.
The figure below illustrates the principle of constant lighting control:
Figure 23: Overview - Proportional zone control
4.8.1 General Settings/ Principle of control
The following figure shows the possible settings for the general constant light control settings:
Figure 24: General settings - Constant light control
