McAfee EPOCDE-AA-BA - ePolicy Orchestrator - PC, Product Manual

Page: 98 / 328

5 Choose if you want to
Use Global Catalog
.
This is deselected by default. Selecting it can provide significant performance benefits. It should
only be selected if the registered domain is the parent of only local domains. If non-local domains
are included, chasing referrals could cause significant non-local network traffic, possibly severely
impacting performance.
Use Global Catalog
is not available for OpenLDAP servers.
6 If you have chosen to not use the Global Catalog, choose whether to
Chase referrals
or not.
Chasing referrals can cause performance problems if it leads to non-local network traffic, whether
or not a Global Catalog is used.
7
Choose whether to
Use SSL
when communicating with this server or not.
8 If you are configuring an OpenLDAP server, enter the
Port
.
9
Enter a
User name
and
Password
as indicated.
These credentials should be for an admin account on the server. Use
domain\username
format on
Active Directory servers and
cn=User,dc=realm,dc=com
format on OpenLDAP servers.
10
Either enter a
Site name
for the server, or select it by clicking
Browse
and navigating to it.
11 Click
Test Connection
to verify communication with the server as specified. Alter information as
necessary.
12
Click
Save
to register the server.
Registering SNMP servers
To receive an SNMP trap, you must add the SNMP server’s information, so that ePolicy Orchestrator
knows where to send the trap.
For option definitions click
?
in the interface.
Task
1 Click
Menu
|
Configuration
|
Registered Servers
, then click
New Server
.
2
From the Server type menu on the Description page, select
SNMP Server
, provide the name and any
additional information about the server, then click
Next
.
3
From the URL drop-down list, select one of these types of server address, then enter the address:
Table 9-1 Option definitions
Option Definition
DNS Name
Specifies the DNS name of the registered server.
IPv4 Specifies the IPv4 address of the registered server.
IPv6
Specifies the DNS name of the registered server which has an IPv6 address.
4
Select the SNMP version that your server uses:
• If you select
SNMPv1
or
SNMPv2c
as the SNMP server version, type the community string of the
server under
Security
.
• If you select
SNMPv3
, provide the
SNMPv3 Security
details.
5 Click
Send Test Trap
to test your configuration.
6
Click
Save
.
9 Setting up registered servers
Registering servers
98 McAfee
®
ePolicy Orchestrator
®
4.6.0 Software Product Guide