Mazda CX-3, Owner'S Manual

Page: 625 / 785

3. Tilt the blade assembly and remove it
from the arm.
CAUTION
To prevent damage to the windscreen
let the wiper arm down easily, do not
let it slap down on the windscreen.
4. Pull down the blade rubber and slide it
out of blade holder.
5. Remove the metal stiffeners from each
blade rubber and install them in the
new blade.
CAUTION
¾
Do not bend or discard the sti ff eners.
You need to use them again.
¾
If the metal sti ff eners are switched,
the blade's wiping e ffi ciency could be
reduced.
So do not use the driver's side metal
sti ff eners on the passenger's side, or
vice versa.
¾
Be sure to reinstall the metal
sti ff eners in the new blade rubber so
that the curve is the same as it was in
the old blade rubber.
6. Carefully insert the new blade rubber.
Then install the blade assembly in the
reverse order of removal.
Maintenance and Care
Owner Maintenance
6-34
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52