Mazda CX-3 Owner'S Manual Download Page 150

Page: 150 / 785

Fuel-Filler Flap and Cap

WARNING

When removing the fuel-

ller cap, loosen

the cap slightly and wait for any hissing to

stop, then remove it:

Fuel spray is dangerous. Fuel can burn skin

and eyes and cause illness if ingested. Fuel

spray is released when there is pressure in

the fuel tank and the fuel-

ller cap is

removed too quickly.

Before refuelling, stop the engine, and

always keep sparks and

ames away from

the

ller neck:

Fuel vapour is dangerous. It could be

ignited by sparks or

ames causing serious

burns and injuries.

Additionally, use of the incorrect fuel-

ller

cap or not using a fuel-

ller cap may result

in a fuel leak, which could result in serious

burns or death in an accident.

Do not continue refuelling after the fuel

pump nozzle shuts o

automatically:

Continuing to add fuel after the fuel pump

nozzle has shut o

automatically is

dangerous because over

lling the fuel tank

may cause fuel over

ow or leakage. Fuel

over

ow and leakage could damage the

vehicle and if the fuel ignites it could cause

re and explosion resulting in serious

injury or death.

CAUTION

Always use only a designated Mazda

fuel-

ller cap or an approved equivalent,

available at an expert repairer (we

recommend an Authorised Mazda

Repairer). The wrong cap can result in a

serious malfunction of the fuel and

emission control systems.

▼

Refuelling

Before refuelling, close all the doors,
windows, and the liftgate, and switch the
ignition OFF.
1. To open the fuel-filler flap, pull the

remote fuel-filler flap release.

Remote fuel-filler flap release

2. To remove the fuel-filler cap, turn it

anticlockwise.

Before Driving

Fuel and Emission

3-29

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands