Mazda CX-3, Owner'S Manual, Page: 137 / 785

NOTE
x
Function number 3 in the following
table is the factory setting for your
vehicle.
x
There are only a total of six auto lock/
unlock settings available for automatic
transaxle vehicles, and three for manual
transaxle vehicles. Be sure to press the
unlock side of the door-lock switch the
correct number of times according to the
selected function number. If the switch is
mistakenly pressed seven times on an
automatic transaxle vehicle or four
times on a manual transaxle, the
procedure will be cancelled. If this
occurs, start the procedure from the
beginning.
Function
number
Function
*1
1
The auto door-lock function is disa‐
bled.
2
All the doors and the liftgate lock au‐
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more.
3 (Factory
Setting)
All the doors and the liftgate lock au‐
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more. All
the doors and the liftgate unlock
when the ignition is switched from
ON to Off.
4
(Automatic transaxle vehicles only)
When the ignition is switched ON
and the selector lever is shifted from
park (P) to any other gear position, all
the doors and the liftgate lock auto‐
matically.
Function
number
Function *1
5
(Automatic transaxle vehicles only)
When the ignition is switched ON
and the selector lever is shifted from
park (P) to any other gear position, all
the doors and the liftgate lock auto‐
matically.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un‐
lock automatically.
6
(Automatic transaxle vehicles only)
All the doors and the liftgate lock au‐
tomatically when the vehicle speed is
about 20 km/h (12 mph) or more.
When the selector lever is shifted to
park (P) while the ignition is switched
ON, all the doors and the liftgate un‐
lock automatically.
*
1 Other settings for the auto door lock function are
available at an expert repairer (we recommend
an Authorised Mazda Repairer). For details
consult an expert repairer (we recommend an
Authorised Mazda Repairer). Refer to
Personalisation Features on page 9-13.
Settings can be changed using the
following procedure.
1. Safely park the vehicle. All doors and
the liftgate must remain closed.
2. Switch the ignition ON.
3. Press and hold the lock side of the
door-lock switch within 20 seconds of
switching the ignition ON, and make
sure a beep sound is heard about eight
seconds afterwards.
4. Refer to the auto lock/unlock function
setting table, determine the function
number for the desired setting. Press
the unlock side of the door-lock switch
the same number of times as the
selected function number (Ex. If you
select function 2, press the unlock side
of the switch only 2 times).
Before Driving
Doors and Locks
3-16
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52