Mazda CX-3 Owner'S Manual Download Page 684

Page: 684 / 785

Route the jumper leads away from parts that will be moving:

Connecting a jumper lead near or to moving parts (cooling fans, belts) is dangerous. The lead

could get caught when the engine starts and cause serious injury.

CAUTION

Use only a 12 V booster system. You can damage a 12 V starter, ignition system, and other

electrical parts beyond repair with a 24 V power supply (two 12 V batteries in series or a 24 V

motor generator set).

NOTE

Do not use vehicles with i-ELOOP as a booster vehicle.

1. Move the booster vehicle so that its battery is as close as possible to your vehicle's

battery.

2. Make sure that the power such as for the headlights and air conditioner is turned off.
3. Remove the battery cover.

4. Turn off the booster vehicle's engine and connect the jumper leads in the following

order.
Make sure that the jumper leads are securely connected so that they do not disconnect
due to engine vibrations.

1st lead

Positive (+) terminal on the discharged battery
Positive (+) terminal on booster vehicle's battery

2nd lead

Negative (-) terminal on booster vehicle's battery

If Trouble Arises

Battery Runs Out

7-23

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands