Mazda CX-3 Owner'S Manual Download Page 5

Page: 5 / 785

Lock release lever

Liftgate (Lock only)

Request
switch

Request switch

Front doors

Exterior aerial

80 cm (31in)

Lock

Exterior aerial

Operational range

80 cm (31in)

Unlock

Before Driving

Operational Range

The advanced keyless system operates only when the driver is in the vehicle or
within operational range while the key is being carried.

All doors and the liftgate can be locked/unlocked by pressing the request switch on
the front doors while the key is being carried.

Locking, Unlocking with Request Switch

Steering Wheel Adjustment

1. Stop the vehicle, and then pull down the lock

release lever under the steering column.

3. Attempt to push the steering wheel up and

down to make sure it's locked before driving.

2. Tilt the steering wheel and/or adjust the

steering column length to the desired positions,
then push the lever up to lock the column.

The request switch on the liftgate can only be used to lock all doors and the liftgate.

For details, refer to Section 3, “Advanced Keyless Entry and Start System”,
“Doors and Locks” or “Steering Wheel”.

CX-3̲8GT4EE18D̲Edition8̲QuickGuide.indb 4

2019/11/22 9:08:00

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands