Mazda CX-3 Owner'S Manual Download Page 280

Page: 280 / 785

▼

Fuel Consumption Display

Information regarding the fuel economy is displayed.

Indication on display

Control status

Displays the fuel economy for the past 60 minutes.

Displays the fuel economy every minute for the past
1 to 10 minutes.

Displays the fuel economy every 10 minutes for the
past 10 to 60 minutes.

Displays the average fuel economy over the past 5

resets and after the current reset.

Calculates the average fuel economy every minute

after vehicle travel begins, and displays it.

NOTE

The fuel economy data is synchronized (linked) with the average fuel economy displayed
in the trip computer.

To reset the fuel economy data, press the icon in the menu. (The average fuel economy
displayed in the trip computer resets at the same time.)

After resetting the fuel economy data, “-- -” is displayed while the average fuel economy
is being calculated.

When Driving

Fuel Economy Monitor

4-95

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands