Mazda CX-3 Owner'S Manual Download Page 628

Page: 628 / 785

Battery

WARNING

Read the following precautions carefully before using the battery or inspecting to

ensure safe and correct handling:

Always wear eye protection when working near the battery:

Working without eye protection is dangerous. Battery

uid contains SULPHURIC ACID which

could cause blindness if splashed into your eyes. Also, hydrogen gas produced during normal

battery operation, could ignite and cause the battery to explode.

Wear eye protection and protective gloves to prevent contact with battery

uid:

Spilled battery

uid is dangerous.

Battery

uid contains SULPHURIC ACID which could cause serious injuries if it gets in eyes, or

on the skin or clothing. If this happens, immediately

ush your eyes with water for 15 minutes

or wash your skin thoroughly and get medical attention.

Always keep batteries out of the reach of children:

Allowing children to play near batteries is dangerous. Battery

uid could cause serious injuries

if it gets in the eyes or on the skin.

Keep

ames and sparks away from open battery cells and do not allow metal tools to

contact the positive ( ) or negative ( ) terminal of the battery when working near a battery.

Do not allow the positive ( ) terminal to contact the vehicle body:

Flames and sparks near open battery cells are dangerous. Hydrogen gas, produced during

normal battery operation, could ignite and cause the battery to explode. An exploding battery

can cause serious burns and injuries. Keep all

ames including cigarettes and sparks away

from open battery cells.

Maintenance and Care

Owner Maintenance

6-37

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands