Mazda CX-3, Owner'S Manual

Page: 353 / 785

Indicated in active driving display
If the vehicle speed exceeds the set speed by about 3 km/h (2 mph) or faster, the background
of the ASL set speed indication turns amber and flashes 3 times. In addition, a warning
sound is activated at the same time. The indication stops flashing and remains on if the
vehicle speed continues to exceed the set speed by about 3 km/h (2 mph) or faster, and the
indication and warning sound remain on until the vehicle is driven at the set speed or slower.
Verify the safety of the surrounding area and adjust the vehicle speed by applying the
brakes. Additionally, keep a safer distance from the vehicles behind you.
Active Driving Di s play Di s play in the in s trument clu s ter
CAUTION
(With cruise control)
If the set speed is set lower than the current vehicle speed by pressing the SET/ or RES/
switch, the warning beep is not activated for about 30 seconds even if the vehicle speed is
faster than the newly set speed by 3 km/h (2 mph). Be careful not to drive over the set speed.
(With Mazda Radar Cruise Control (MRCC) or Mazda Radar Cruise Control with Stop & Go
function (MRCC with Stop & Go function))
If the set speed is set lower than the current vehicle speed by pressing the SET or RES switch,
the warning beep is not activated for about 30 seconds even if the vehicle speed is faster than
the newly set speed by 3 km/h (2 mph). Be careful not to drive over the set speed.
NOTE
When the system is temporarily cancelled by depressing the accelerator pedal fully, the ASL
display shows the cancel display. If the vehicle speed exceeds the set speed by about 3 km/h
(2 mph) or more while the cancel display is displayed, the set speed display flashes but the
warning sound is not operated.
When Driving
i-ACTIVSENSE
4-168
CX-3_8GT4-EE-18D_Edition8_old 2019-11-14 12:53:52