Mazda CX-3 Owner'S Manual Download Page 681

Page: 681 / 785

3. Install the wheel nuts with the bevelled

edge inward; tighten them by hand.

WARNING

Do not apply oil or grease to wheel nuts

and bolts and do not tighten the wheel

nuts beyond the recommended

tightening torque:

Applying oil or grease to wheel nuts

and bolts is dangerous. The wheel nuts

could loosen while driving and cause

the tyre to come o

, resulting in an

accident. In addition, wheel nuts and

bolts could be damaged if tightened

more than necessary.

4. Turn the wheel brace anticlockwise

and lower the vehicle.

5. Use the wheel brace to tighten the nuts

in the order shown.

If you are unsure of how tight the nuts
should be, have them inspected at an
expert repairer (we recommend an
Authorised Mazda Repairer).

Nut tightening torque

Nꞏm (kgfꞏm, ftꞏlbf)

108―147 (12―14,

80―108)

WARNING

Always securely and correctly tighten

the wheel nuts:

Improperly or loosely tightened wheel

nuts are dangerous. The wheel could

wobble or come o

. This could result in

loss of vehicle control and cause a

serious accident.

If Trouble Arises

Flat Tyre

7-20

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands