Mazda CX-3 Owner'S Manual Download Page 679

Page: 679 / 785

6. Continue raising the jack head

gradually by rotating the screw with
your hand until the jack head is
inserted into the jack-up position.

Tyre blocks

Jackin

position

WARNING

Use only the front and rear jacking

positions recommended in this manual:

Attempting to jack the vehicle in

positions other than those

recommended in this manual is

dangerous. The vehicle could slip o

the jack and seriously injure or even kill

someone. Use only the front and rear

jacking positions recommended in this

manual.

Do not jack up the vehicle in a position

other than the designated jack-up

position or place any objects on or

under the jack:

Jacking up the vehicle in a position

other than the designated jack-up

position or placing objects on or under

the jack is dangerous as it could deform

the vehicle body or the vehicle could fall

the jack resulting in an accident.

Use only the jack provided with your

Mazda:

Using a jack that is not designed for

your Mazda is dangerous. The vehicle

could slip o

the jack and seriously

injure someone.

Never place objects under the jack:

Jacking the vehicle with an object

under the jack is dangerous. The jack

could slip and someone could be

seriously injured by the jack or the

falling vehicle.

7. Insert the jack lever and attach the

wheel brace to tyre jack.

If Trouble Arises

Flat Tyre

7-18

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands