Mazda CX-3 Owner'S Manual Download Page 101

Page: 101 / 785

▼

Using ISOFIX Anchor

WARNING

Follow the manufacturer's instructions for

the use of the child-restraint system:

An unsecured child-restraint system is

dangerous. In a sudden stop or a collision it

could move causing serious injury or death

to the child or other occupants. Make sure

any child-restraint system is properly

secured in place according to the

manufacturer's instructions.

Make sure the child-restraint system is

properly secured:

A child-restraint system that is not secured

is dangerous. In a sudden stop or collision,

it can become a projectile and hit someone,

causing serious injury. When not in use,

remove it from the vehicle, put it in the

luggage compartment or at least make

sure it is securely fastened to the ISOFIX

anchors.

Make sure there are no seat belts or foreign

objects near or around the ISOFIX

anchor-secured child-restraint system:

Not following the child-restraint system

manufacturer's instructions when

installing the child-restraint system is

dangerous. If seat belts or a foreign object

prevent the child-restraint system from

being securely attached to the ISOFIX

anchors and the child-restraint system is

installed improperly, the child-restraint

system could move in a sudden stop or

collision causing serious injury or death to

the child or other occupants. When

installing the child-restraint system, make

sure there are no seat belts or foreign

objects near or around the ISOFIX anchors.

Always follow the child-restraint system

manufacturer's instructions.

1. First, adjust the front seat to allow

clearance between the child-restraint
system and the front seat (page 2-5).

2. Make sure the seatback is securely

latched by pushing it back until it is
fully locked.

3. Expand the seams on the rear of the

seat bottom slightly to verify the
locations of the ISOFIX anchor.

Type A

Type B

Essential Safety Equipment

Child Restraint

2-38

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands