Mazda CX-3 Owner'S Manual Download Page 677

Page: 677 / 785

1. Park on a hard, level surface off the

right-of-way and firmly set the parking
brake.

2. Put a vehicle with an automatic

transaxle in Park (P), a manual
transaxle in Reverse (R) or 1, and turn
off the engine.

3. Turn on the hazard warning flasher.
4. Have everyone get out of the vehicle

and away from the vehicle and traffic.

5. Remove the jack, tool, and spare tyre

(page 7-3).

6. Block the wheel diagonally opposite

the flat tyre. When blocking a wheel,
place a tyre block both in front and
behind the tyre.

NOTE

When blocking a tyre, use rocks or
wood blocks of sufficient size if
possible to hold the tyre in place.

▼

Removing a Flat Tyre

WARNING

When jacking-up a vehicle, always shift the

shift lever to 1st or R position (manual

transaxle vehicle) or shift the selector lever

to P position (automatic transaxle vehicle),

apply the parking brake, and place wheel

blocks in the position diagonally opposed

to the jack:

Changing a

at tyre without using wheel

blocks is dangerous because the vehicle

may move and fall o

the jack even with

the shift lever in 1st or R position, or the

selector lever is in P position, which could

result in an accident.

1. If your vehicle is equipped with a

wheel cover, pry off the wheel cover
with the bevelled end of the jack lever.

NOTE

Force the end of the jack lever firmly
between wheel and cover, or removal
will be difficult.

If Trouble Arises

Flat Tyre

7-16

CX-3_8GT4-EE-18D_Edition8_old

2019-11-14 12:53:52

Summary of Contents for CX-3


















































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands

Mazda CX-3, Owner'S Manual

Search results

Summary of Contents for CX-3

Reviews:

Related manuals for CX-3

Brands by name

Popular brands