Matrix Telecom Proton 206, System Manual

Page: 50 / 98

50 PROTON 206/308 V1 System Manual
Timer of Relevance:
ECF RBT Timer
-Time for which the system gives RBT to the caller as an acknowledgment of the receipt of the
call and after that the system dials the telephone number.
Command:
217-32-Timer
Default: 03 seconds
Valid Range: 01 to 99 seconds.
Important Point:
• ECF calls are same as DOSA calls. The ECF call shall get disconnected after time = DOSA Inactivity Timer +
DOSA Wait Timer. Hence to continue as ECF call, it is mandatory for the user to dial any digit after the
warning beeps.
Relevant Topics:
1. “Trunk Access” 75
2. “Direct Outward System Access (DOSA)” 44
Executive/Secretary
What’s this?
Please refer “Call Forward” for more details.
Flash Timer
What’s this?
While transferring a call, one uses the hook switch or the ‘Flash’ key provided on the telephone instrument or
digit ‘1’ if the telephone instrument is in pulse mode.
Many times it happens that while transferring the call, the call either gets disconnected or is not transferred. This
happens due to mismatch of time for which the hook switch is pressed, if used for transferring the call hence it is
advisable to use Flash Key of the telephone instrument. This problem may occur with Flash Key also, if the timer
for the Flash Key on the telephone instrument and the flash timer of the system are not set properly.
Few telephone instruments have flash timers set to 800 ms. In such case the call does not get transferred
because the flash timer of all stations is set at 600 ms by default. In such cases the flash timer of the station
where the cordless phone is connected should be increased to 800ms.
Use following command to set Flash Timer:
36-Station-Count
Where,
Station is the software port number is from 21 to 28.
Count is from 2 to 9. (count 1 implies 100 milliseconds)
By default, Flash Timer is 6 (600 milliseconds).
Use following command to set same Flash timer on all stations:
36-*-Count
Example:
To set the flash timer 800ms on station 23, dial 36-23-8 .
Important Point:
• Flash timer should be changed very cautionsly.