Matrix Telecom Proton 206 System Manual Download Page 33

Page: 33 / 98

PROTON 206/308 V1 System Manual

Call Splitting between a station and a trunk

Important Points:

•

Only one of the two persons will be in conversation with you at a time. The third person is on hold. He gets
music and cannot hear your conversation.

•

When in speech with a station and getting external call waiting tone, you can dial

Flash-1

to answer the trunk

call. The station is put on hold and gets music. Now, you can split between the two persons.

•

Interrupting station can also be answered very much in the same way as described above. Your current call
is put on hold and speech with the interrupting station is established. Once again, you can split between the
two persons.

•

Conference can be invoked to include both the parties by dialing

Flash-0.

•

A station user having access to ‘Call Hold’ can only do call splitting.

How to program?

Please refer

“Class Of Service (COS)”

for details on how to allow ‘Call Hold’ to a user.

Relevant Topics:

“Conference” 39

“Call Transfer” 33

“Call Park” 28

“Class Of Service (COS)” 36

Call Transfer

The PROTON 206/308 offers four types of call transfer:
•

Call Transfer-Screened

•

Call Transfer-While ringing

•

Call Transfer-On busy

•

Call Transfer-Trunk-to-Trunk

Call Transfer-Screened

What’s this?

•

This is normal call transfer and the most widely used.

•

Operators can use this method to transfer incoming calls.

How to use it?

Speech with called party when the call is answered.

7 Dial

Flash-1.

Speech with held party.

Speech with trunk.

Dial

Flash.

Feature tone. External party goes on Hold.

Dial

Station.

Ring Back Tone

Speech with the station when the call is answered.

Dial

Flash-1.

Speech with held party.

Speech with trunk.

Dial

Flash.

Feature tone

Dial

Station.

Ring Back Tone

Wait for the station to answer.

Speech when ring answered.

Put the handset.

Call is transferred.

Summary of Contents for Proton 206



































































































Search results

Summary of Contents for Proton 206

Reviews:

Related manuals for Proton 206

Brands by name

Popular brands

Matrix Telecom Proton 206, System Manual

Search results

Summary of Contents for Proton 206

Reviews:

Related manuals for Proton 206

Brands by name

Popular brands