![background image](http://html1.mh-extra.com/html/matrix-telecom/proton-206/proton-206_system-manual_1741392069.webp)
PROTON 206/308 V1 System Manual
69
Important Points:
•
This command should be issued very cautiously as outgoing calls will be hampered.
•
On issuing this command the station will be assigned a solo group automatically and he will be able to talk to
only the stations in the universal group.
Remote Programming
What’s this?
One can program the PROTON 206/308 from any remote location. The remote user can program the system
using the same commands as used by a normal local station to program the system.
How it works?
•
Often customers do not have time to read the system manual and program the system at their own, they can
ask the dealer to program the system from his office as per your needs.
•
Customer makes a call to the dealer. Alternatively, dealer can also call the customer. Dealer is the remote
end.
•
Once in speech, customer should dial ‘
Flash-3999
’. Dialing ‘
Flash
’ puts the remote end on hold. Dialing
‘3999’ again establishes the speech between the customer and the remote end.
•
The customer or the dealer may dial the password. Dialing correct password gives programming beeps. Both
the parties can hear programming beeps.
•
Now the dealer can start programming from his office. Alternatively the customer can also dial the codes on
request from the dealer.
•
Dealer or the customer should dial ‘
0
’ to exit from programming mode.
•
The customer may disconnect when programming is over.
Important Points:
•
All the steps and codes are same as in local programming.
•
User can dial his own secret password. Remote end need not know the password.
•
It is mandatory to establish speech and remain connected with one station throughout the programming
session. They can continue talking while entering programming codes. This makes the whole process
interactive.
•
Remote end must dial in tone (DTMF) mode.
Relevant Topic:
1.
Restart the System
What’s this?
The PROTON 206/308 supports a command from the SE mode to restart the system. This command gives
same effect as switching off the system and switching it on again. Many times if is difficult to physically walk to
the system and restart it. It is convenient if we could do the same from a station. This command precisely
provides this facility.
How to use it?
Use following command to restart the system:
10
Important Point:
•
This command does not alter any programming parameters. However, all active conversations will be
disconnected and the ports in use will be released.
Summary of Contents for Proton 206
