Matrix Telecom Proton 206, System Manual

Page: 29 / 98

PROTON 206/308 V1 System Manual 29
Relevant Topic:
1. “Class Of Service (COS)” 36
Call Pick Up
What’s this?
You can answer calls of your colleague or co-worker without physically going to his station. You can use this
feature to answer even trunk calls ringing on other stations. The PROTON 206/308 offers two types of call pick
up facility viz. Call Pick Up-Group and Call Pick Up-Selective.
Call Pick Up-Group
Calls of any station within your group can be answered simply by dialing `4’ after lifting the handset.
•
Maximum 10 call pick up groups can be formed.
• In case more stations are ringing, the station with the least port number will be picked up first.
• This feature can be used when people performing same job sit in groups and intragroup call pick up is to be
allowed whereas inter group call pick up is to be restricted.
How to use it?
Call Pick Up-Selective
• Call of any ringing station can be answered by dialing 12-Station after lifting the handset.
• This is useful when more than one stations are ringing and you want to answer one of them selectively.
• For selective call pick up, it is not necessary for the station to be in the same pick up group.
How to use it?
How to program?
Call Pick Up-Group
Step 1: Decide number of call pick-up groups to be formed.
Step 2: Program the station in call pick-up group using command 301.
Step 3: Assign a Class of Service group with call pick-up feature enabled.
Step 1
Decide the number of call pick-up groups to be formed.
Step 2
Use following command to program a station in call pick-up group:
301-Station-Call Pick Up Group
Where,
Station is from 21 to 28.
Call pick-up group is from 0 to 9.
Use following command to program all stations in same call pick-up group:
301-*-Call Pick-Up Group
By default, all stations are in the same group.
1 Lift handset. Dial tone
2 Dial 4. Speech.
1 Lift handset. Dial tone
2 Dial 12-Station. Speech.