![background image](http://html1.mh-extra.com/html/matrix-telecom/proton-206/proton-206_system-manual_1741392020.webp)
20
PROTON 206/308 V1 System Manual
•
If the system detects ring back tone, it gives ring on your station. When you lift the handset, you get
connected with the desired party.
•
The system uses the same trunk type you used to make a call. If you dialed the number using trunk access
code 5, the system takes one of the free trunks from this group for Auto Redial. If you tried out the number on
a selected trunk, the system uses that particular trunk only.
•
Auto Redial will suspend if there is any activity (ringing or dialing) on your station. It resumes as soon as your
station becomes free.
•
Auto Redial does not work in following cases:
•
If the trunk lines do not support standard tones. Frequency and timings are critical for auto redial to work.
•
Trunk condition is poor and various tones cannot be detected properly.
•
Called party lifts within 3 seconds after the ring starts on his phone.
•
Behind the PBX applications where Matrix trunks are connected to stations of some other PBX which do not
support standard tones.
Relevant Topic:
1.
Barge-In
What’s this?
•
When your message is urgent and you cannot wait for the called person to become free, you can land in his
conversation after intimating him.
•
While landing, you get music and the called person gets beeps of internal call waiting tone.
•
During the beeps, the called person can dial ‘
Flash-1
’ to answer your call. In this case the third party is put on
hold and gets music and hence cannot listen to your conversation.
•
If the called person does not dial ‘
Flash-1
’ then speech is automatically established after time = barge-in
timer.
•
Replace your handset once your talk is over. This will automatically restore his original speech with the held-
up party.
How to use it?
Example:
Station 23 is busy. To give a very urgent message to him, dial 33 on busy tone.
How to program?
for details on how to allow Barge-In to a station.
Timer of Relevance:
Barge-In Timer
-Time after which the speech is established.
Command :
217-12-Timer
Default : 05 seconds
Valid Range : 01 to 99 seconds.
Important Points:
•
Barge-In can work only if the destination is in speech.
•
Barge-In works even when the destination is talking on the trunk line.
1
Lift handset.
Dial tone
2
Dial
Number.
Busy tone
3
Dial
33.
Music. The destination gets beeps.
4
The system connects you to the destination after
5 seconds. Start talking after the music stops.
Summary of Contents for Proton 206
