Maschinenfabrik Reinhausen TAPCON 250, Operating Instructions Manual

Page: 81 / 192

9 Operation
Maschinenfabrik Reinhausen GmbH 2022 81 8595017/00 EN TAPCON
®
250
Synchronization interval
You can use this parameter to set the interval at which the device is to call
up the time from the time server.
Time zone
To adjust the device time to your local time, you can use the time shift pa-
rameter to set the time shift to UTC.
Example:
Region Time shift to UTC
Mumbai, India UTC +5:30 h
Beijing, China UTC +8:00 h
Brasilia, Brazil UTC -3:00 h
Table 15: Time shift to UTC (Coordinated Universal Time)
Time
You can use this parameter to set the date and time manually.
SNTP time server 2
You can use this parameter to enter the IP address of the second time
server (optional).
9.1.4 Setting the screensaver
To increase the service life of the display on the front panel of the device,
you can activate and set a screensaver. The following functions are avail-
able for this purpose:
▪ Screensaver waiting time
1. Go to Settings > Parameters > System > Screensaver .
2. Select the desired parameter.
3. Set the parameter.
4. Press the Accept button to save the modified parameter.
Screensaver
If you activate this function, the device fully switches off the display when the
adjustable waiting period has expired if no key is pressed. The display
switches on again if you press any key.
Deactivating the screensaver has a negative impact on the service life of
the display. Maschinenfabrik Reinhausen recommends that you activate the
screensaver and set a waiting period of 15 minutes.