Maschinenfabrik Reinhausen TAPCON 250 Operating Instructions Manual Download Page 17

Page: 17 / 192

2 Safety

Maschinenfabrik Reinhausen GmbH 2022

8595017/00 EN

TAPCON

250

Protective clothing

Close-fitting work clothing with a low tearing strength,
with tight sleeves and with no protruding parts. It mainly
serves to protect the wearer against being caught by
moving machine parts.

Safety shoes

To protect against falling heavy objects and slipping on
slippery surfaces.

Safety glasses

To protect the eyes from flying parts and splashing liq-
uids.

Visor

To protect the face from flying parts and splashing liq-
uids or other dangerous substances.

Hard hat

To protect against falling and flying parts and materials.

Hearing protection

To protect against hearing damage.

Protective gloves

To protect against mechanical, thermal, and electrical
hazards.

Table 4: Personal protective equipment

Summary of Contents for TAPCON 250

































































































































































































Search results

Summary of Contents for TAPCON 250

Reviews:

Related manuals for TAPCON 250

Brands by name

Popular brands

Maschinenfabrik Reinhausen TAPCON 250, Operating Instructions Manual

Search results

Summary of Contents for TAPCON 250

Reviews:

Related manuals for TAPCON 250

Brands by name

Popular brands