Marvelmind IA-04-2D-Badge Operating Manual Download Page 186

Page: 186 / 263

186

9.11. Filters

Those features help to get more stable tracking and avoid

“jumps” of the mobile

beacons.

9.11.1.

Spot filtering (for IA only)

This feature using to filte

r mobile beacons “jumps” in Dashbord.

This feature works from the Modem.

How to use:

When Modem connected to PC, choose it in Dashboard and put a tick next to

Spot filtering parameter. This is number of dots, when filter:

Insert Samples number (minimum number of dots when filtering starts):

Insert Max. distance between updates (maximum distance between points):

Enable Filtering during tracking, for filtering when device moves.

Summary of Contents for IA-04-2D-Badge








































































































































































































































































Search results

Summary of Contents for IA-04-2D-Badge

Reviews:

Related manuals for IA-04-2D-Badge

Brands by name

Popular brands

Marvelmind IA-04-2D-Badge, Operating Manual

Search results

Summary of Contents for IA-04-2D-Badge

Reviews:

Related manuals for IA-04-2D-Badge

Brands by name

Popular brands