Marvelmind IA-04-2D-Badge Operating Manual Download Page 161

Page: 161 / 263

161

9.1.2.

License MMSW0005 designation in Dashboard

MMSW0005

– one of the most significate license for Marvelmind SW.

Learn more:

SW Pack 7.0/7.1 Release Notes

In the previous version of SW (older than 7.200), when license been activated version of
SW changed from 7.0xx to 7.1xx.

From version 7.200 activated

license shows in Dashboard as “L”

If license MMSW0005 activated for all devices, it shows L in the window
capture of Dashboard, next to version of Dashboard:

If license not activated for one or more beacons in a system, it will be reported
in the right information window:

And “L” will be shown next to version of firmware of each beacon with activated
license:

Summary of Contents for IA-04-2D-Badge








































































































































































































































































Search results

Summary of Contents for IA-04-2D-Badge

Reviews:

Related manuals for IA-04-2D-Badge

Brands by name

Popular brands

Marvelmind IA-04-2D-Badge, Operating Manual

Search results

Summary of Contents for IA-04-2D-Badge

Reviews:

Related manuals for IA-04-2D-Badge

Brands by name

Popular brands