42
Exterior 1200 Image Projector user manual
before the Master luminaire, a "go to scene x
x
" message will result in the first scene
being played.
6. If a slave has more scenes than the master calls, the last scenes in the slave will never
be executed, as is the case with scene S4 in the following example.
7. In synchronized operation, the wait time is determined by the master. Every slave
luminaire fades and waits at its own rate and then remains in the “wait” state until it
receives a “start scene xx” command from the master.
8. A slave luminaire will not listen for the next message from the master luminaire before
it has finished its current scene. This may result in a slave skipping a scene if the slave
has a longer scene time than the master. Note that in the following example, the
scenes in the slave run out of their programmed sequence because scenes 0 and 2 on
the slave are longer than the corresponding scenes on the master.
6 . 1 . 3 S t a n d - a l o n e p r o g r a m m i n g m e t h o d s
You can program stand-alone shows on the Exterior 1200 Image Projector using the
Martin MUM application on a personal computer (recommended because it provides an
intuitive, easy-to-use, graphical user interface) or the luminaire’s onboard control panel.
If you are programming a group of luminaires to perform the same scenes with
synchronized master/slave triggering, we recommend that you:
1. use MUM to program a show on one slave luminaire
2. download and save this luminaire’s program and settings to your PC using MUM’s
Files menu, and then
3. upload the program and settings to each subsequent luminaire that you connect to.
F=fade, W=wait
Timeline =>
M0
M1
M2
M3
Programmed in Master
F
W
F
W
F
W
F
W
S0
S1
S2
S3
S4
Programmed in Slave
F
W
F
W
F
W
F
W
F
W
Result
M0
M1
M2
M3
F
W
F
W
F
W
F
W
S0
S1
S2
S3
F
W
F
W
F
W
--
-- F
W
M=master, S=slave
F=fade, W=wait
Time >
Programmed
M0
M1
M2
Master
F
W
F
W
F
W
S0
S1
S2
Slave
F
W
F
W
F
W
Result
M0
M1
M2
M0
M1
Master
F
W
F
W
F
W
F
W
F
W
S0
S2
S1
Slave
F
W
F
W
..
..
F
W
..
..
Summary of Contents for Exterior 1200
