![background image](http://html1.mh-extra.com/html/martin/exterior-1200/exterior-1200_user-manual_1732848031.webp)
General
31
By default, the display dims to minimum automatically 2 minutes after the lamp is turned
on. The backlight returns to its preset intensity level as soon as a control button is
pressed, or in the event of an error or warning message.
A backlight can be switched on, making the display easy to read in the dark, via the
Se t
b a c kl i g h t l e v el
command in the
P e r s on a l it y
menu. The brightness of the display
can be adjusted from 100 (maximum) to zero (minimum).
See "
9.3: Onboard control panel menus"
on page 82 for a complete overview of the
options available in the onboard control panel.
Self-diagnostic feedback messages
In the event of a problem, the Exterior 1200 Image Projector will show a message in the
display indicating the type of problem that has occurred.
4 . 1 . 7 C o o l i n g f a n s
When power is applied, cooling fans run at full speed for a few seconds to clear any dust
that has accumulated in the heat exchanger. After this, fan speed is regulated
thermostatically to maintain an even temperature in the luminaire. When the lamp is
switched off without cutting power to the luminaire, fans remain active.
4 . 1 . 8 L E D s a n d o p e r a t i n g s t a t u s
Two LEDs on the rear panel indicate the Exterior 1200 Image
Projector’s operational status. The LEDs are visible from a
distance.
Normal operation is indicated when LED 1 lights green. LED 2
lights green when a valid DMX signal is being received. See
Table 5 on page 81 for other status messages.
LED 1
LED 2
SENSOR
Summary of Contents for Exterior 1200
