![background image](http://html1.mh-extra.com/html/martin/exterior-1200/exterior-1200_user-manual_1732848014.webp)
14
Exterior 1200 Image Projector user manual
3.1 Physical installation
DANGER! Read "
Safety information"
on page 4 before installing the Exterior 1200
Image Projector.
Warning! The safety and suitability of lifting equipment, installation location,
anchoring method, mounting hardware and electrical installation is the
responsibility of the installer. All local safety regulations and legal requirements
must be observed when installing and connecting the Exterior 1200 Image
Projector. Installation must be carried out by qualified professionals only. Contact
your Martin Architectural supplier for assistance if you have any questions about
how to install this product safely.
Important! Before the product can be used, the supplied lamp must be installed and
a protective foam insert must be removed from the CMY module as described in the
next section.
3 . 1 . 1 U n p a c k i n g a n d p r e p a r i n g f o r u s e
The Exterior 1200 Image Projector is supplied with the following items:
• A foam block wedged around the CMY flags and a metal bracket on the lens cars (see
Figure 2 on page 15) to protect components during transport. The block and bracket
must be removed before use!
• Philips MSD 1200 metal halide lamp that must be installed before use.
• Mounting yoke.
• Cable glands for power and control cable entry.
• Blanking plugs (installed) for sealing unused cable entry holes.
• User manual.
See Figure 1. The mounting yoke is folded back for shipment. When the luminaire has
been unpacked:
1. Supporting the luminaire’s weight, rest it on its top (the opposite surface to the heat
exchanger) and use an Allen key to loosen the yoke clamp locking screws (
A
) and tilt
lock screws (
B
) on each side of the yoke.
400mm
15 ”
3
4
/
Mounting yoke
Heat exchanger
A
A
B
B
6mm
Figure 1: Mounting yoke adjustment
Summary of Contents for Exterior 1200
