![background image](http://html1.mh-extra.com/html/martin/exterior-1200/exterior-1200_user-manual_1732848040.webp)
40
Exterior 1200 Image Projector user manual
6.1 Stand-alone programming: general
DANGER! Read "
Safety information"
on page 4 before programming or operating
the Exterior 1200 Image Projector.
6 . 1 . 1 I n t r o d u c t i o n
Stand-alone operation is a mode where the luminaire executes color changes at set
intervals and speeds, at pre-defined periods during the day, and/or when the light level
falls below a defined level. The term
stand-alone
is used to mean that the Exterior 1200
Image Projector is not connected to a control device, but is pre-programmed with a series
of up to 20 scenes that play continuously in a loop.
An Exterior 1200 Image Projector can run a stand-alone show independently or with
synchronized scene changes with other Exterior 1200 Image Projector luminaires and
most other Martin Architectural luminaires (see "
6.1.2: Synchronized operation with
multiple luminaires"
on page 40 for details).
About scenes
A stand-alone light show consists of scenes. Each scene is a particular lighting effect with
predetermined color, intensity and duration. Up to 20 scenes can be programmed into the
Exterior 1200 Image Projector’s program memory.
Each scene has a dynamic part – the fade – during
which effects move to the scene’s programmed
positions, and a static part – the wait – where effects
do not change.
The duration of the fade and wait is programmed
individually for each scene. The fade time may be 0 -
120 seconds; the wait time may be 1 second to 12
hours. The total time it takes a scene to execute is
the sum of the fade and wait times.
6 . 1 . 2 S y n c h r o n i z e d o p e r a t i o n
w i t h m u l t i p l e l u m i n a i r e s
If you are running multiple luminaires on a data link, you can synchronize action so that all
luminaires start their programmed shows and start fading to the next scene at the same
time.
Fade
Fade
Sc
en
e
1
Sc
en
e
1
S
ce
ne
3
S
ce
ne
3
Scen
e2
Scen
e2
W
ait
Wait
W
ait
Fade
Figure 15: Scene timing
Summary of Contents for Exterior 1200
