Installing a rotating gobo
69
8.8 Installing a rotating gobo
Standard or custom metal or glass rotating gobos can be installed in the Exterior 1200
Image Projector’s rotating gobo wheel. See Specifications on page 86 for dimensions, etc.
Gobos are exposed to intense heat. See Figure 25. To optimize their lifetimes, it is
normally best to install gobos with the more reflective surface facing towards the lamp and
the darker side facing away from the lamp, but consult your gobo supplier before
installing.
See Figure 26. To obtain a true projection, gobos must be designed and installed so that
the image is true viewed from the lamp and reversed viewed from the front of the
luminaire.
The gobos in the Exterior 1200 Image Projector gobo wheel are mounted in rotating
goboholders.
To remove a goboholder:
1. Lock out power, open the luminaire and slide the effects module out of the housing as
described in "
8.5.3: Installing the lamp"
on page 64.
More reflective surface towards lamp
Darker surface away from lamp
Figure 25: Avoiding gobo heat damage
abc
abc
Figure 26: Gobo orientation
Summary of Contents for Exterior 1200
