![background image](http://html1.mh-extra.com/html/martin/exterior-1200/exterior-1200_user-manual_1732848046.webp)
46
Exterior 1200 Image Projector user manual
The following options are available:
Intensity
The dimmer provides smooth, high-resolution 0 - 100%
dimming.
Cyan
Magenta
Yellow
The CMY color mixing system is based on graduated cyan,
magenta, and yellow color filters. A full spectrum of colors can
be achieved by varying the amount of each filter from 0 to
100%.
Note that mixing 3 colors results in loss of light - the light is
blacked out when all 3 colors are fully applied. For maximum
brightness, mix only 2 colors at a time.
Zoom
The lens can be driven forwards or backwards to vary the size
of the beam.
Focus
Focus can be adjusted from approximately 2 meters to infinity.
Note that sharpest focus is achieved when projecting onto a
surface that is at 90° to the axis of projection. Soft focus gives
best results with some animation effects.
Color filter
Click on one of the four square buttons colored blue, green, red
or white to select a filter in the color wheel.
Note that depending on which filters are installed and their
positions in the color wheel, the color applied may not be the
same as the color of the button in the MUM window.
Gobo
Gobo 1 - 4 can be selected by clicking on the appropriate
numbered button. Speed and direction of rotation is set by
moving the
Rotate
slider.
Animation
The angle of the animated patterns in the gobo projection is set
by moving the
User
slider. The speed and direction of
movement of the patterns is set by moving the
Rotate
slider.
Scene fade
time
The fade time, anything from 0 to 120 seconds, is the time it
takes to change from one effect to another.
Scene wait
time
This is the duration a color is applied. A wait time can be from 1
second to 12 hours.
Summary of Contents for Exterior 1200
