MARMON ANGELO PO COMBISTAR FX, Technical Manual, Page: 92 / 178

Copyright by Servizio Clienti ANGELO PO Spa
92
4.4.2. Recommended values of combustion
Here below there are listed the values of combustion (CO2, CO) recommended by "Angelo
Po", values taken should be as closely as possible to these values. It is recommended to
take the measure after 2-3 minutes that the flame has stabilized, in fact at the ignition it
could measure higher values of CO which could affect the measurements. The system, if
well adjusted, should take values of CO below 100 ppm, if they are higher act as described
in the following paragraph. Similarly, if the values of CO2 have a difference greater than ±
0.5% (± 0.8%) compared to the recommended action following the directions described in
the next section.
FX-BX 61G CO2% Range CO2% CO ppm
G20
minimum 9,3%
± 0,5 0÷100
Maximum 10,7%
± 0,8 0÷100
G25
minimum 9,2%
± 0,5 0÷100
Maximum 9,9%
± 0,8 0÷100
G25.1
minimum 10,2%
± 0,5 0÷100
Maximum 10,8%
± 0,8 0÷100
G30
minimum 13,1%
± 0,5 0÷100
Maximum 12,8%
± 0,8 0÷100
G30 50mbar
minimum 13,8%
± 0,5 0÷100
Maximum 12,8%
± 0,8 0÷100
G31
minimum 11,2%
± 0,5 0÷100
Maximum 12,0%
± 0,8 0÷100