MARMON ANGELO PO COMBISTAR FX, Technical Manual

Page: 12 / 178

Copyright by Servizio Clienti ANGELO PO Spa
12
1.3. Instruction to reduce width
FX61, FX101
The smallest dimension (depth) of the 61-101 models is about 900mm .
It is possible to reduce it by:
Option A - 20mm - removing the T protection from the oven drain.
Option B - 66mm - removing the T-protection from the oven drain, the T-pipe from the
drain and the cooling fan protection at the back.
Option C - 56mm - disassembling the handle / lock assembly and handle.
By combining options B and C the minimum oven measurement is approximately 778mm.
FX82, FX122
The smallest dimension (depth) of models 82-122 is about 1093mm . It is possible to
reduce it by:
Option A - 20mm - removing the T protection from the oven drain .
Option B - 68mm - removing the T-protection from the oven drain, the T-pipe from the
drain and the cooling fan protection at the back.
Option C - 56mm - disassembling the handle / lock assembly and handle.
By combining options B and C the minimum oven measurement is approximately 970mm .
Option D (valid only for FX82) - As follows:
- disassemble the oven body from the support (the screws to be removed are at the top of
the 4 uprights and on the inside of the base where the two support bars are).
- lift the oven body and make it pass through the narrower part.
- Reassemble the oven body on the support.
The minimum oven measurement possible is about 905mm .