MCP-601 Operator’s Manual
Magni Systems, Inc.
9
1. ABOUT THIS MANUAL
This manual describes how to install, configure, and operate the MagniCoder Premier MCP-601 DVI/VGA to
SDI graphics-to-video scan converter. The information presented will help to familiarize you with all aspects
of the MCP-601 and provide a reference tool for questions you might have in the future.
This guide is written specifically for anyone responsible for installing and operating the MCP-601.
Conventions
Convention
Example
Description
Refer to
Italics are typically used for titles, comments, and
references to other sections of this manual or other
manuals.
A:\setup
Monospaced text indicates a command that you need to
enter to run an application or utility.
Enter
Bold faced text indicates a key that must be pressed on
the keyboard to complete an action.
Special Notices
Two kinds of special notices are used in this Operator’s manual to emphasize specific information.
WARNING:
identifies conditions or actions that could
result in personal injury.
CAUTION:
identifies conditions or actions that could
result in improper equipment operation and/or damage to
equipment or other property.
Safety Precautions
Adhere to the following safety precautions to ensure proper use of the MCP-601.
WARNING:
FOR PLUGGABLE EQUIPMENT, THE
SOCKET OUTLET SHALL BE INSTALLED NEAR THE
EQUIPMENT AND SHALL BE EASILY ACCESSIBLE.
Failure to do so can cause personal injury and or
equipment
failure.