Magni MCP-601, Operator'S Manual, Page: 45 / 90

MCP-601 Operator’s Manual
Magni Systems, Inc. 45
Factory Preset Default Memories (MCP-601-D)
Table 5-1c
Factory Preset Default Memories
1
VIDEO INPUT GRAPHICS Genlock VIDEO OUTPUT
KEY
8
MIX
FUNCTION Location Setting Resizer Input Resizer Source Format
Standard
6
Type Color Graphics/Video
Scan Conversion:
Scan Conversion, VGA / No input PowerUp
None
7
N/A VGA Full scan
Internal
Clock
SDI 525 Off Black 100% / 0%
Scan Conversion, DVI / Ref input 1 None N/A DVI
Underscan
2
REF-IN
4
SDI 525 External Black 100% / 0%
Scan Conversion, DVI / SDI inputs 2 SDI N/A DVI
1:1 MagniPort
3
SDI input
5
SDI 525 External Black 100% / 0%
Video Squeeze/ Graphics split:
Split-screen 56% size Video 3 SDI
56%
(3/4x3/4)
DVI Underscan SDI input SDI 525 Off Black 0% / 100%
Split-screen 25% size Video 4 SDI
25%
(1/2x1/2)
DVI Underscan SDI input SDI 525 Off Black 0% / 100%
Overlay, Keying and Mixing:
VGA Zoom 1 to 1, Standard Key 5 SDI 100% DVI
1:1 MagniPort
3
SDI input SDI 525 Standard Black 100% / 0%
Transparent Key Mode 6 SDI 100% DVI Underscan SDI input SDI 525 Transparent BLK/WHT
9
100% / 0%
Graphics Key Mode 7 SDI 100% DVI Underscan SDI input SDI 525 Graphics White 100% / 0%
Video (Chroma) Key Mode 8 SDI 100% DVI Underscan SDI input SDI 525 Video Blue 100% / 0%
Mix, VGA and SDI inputs 9 SDI 100% VGA Underscan SDI input SDI 525 Off Black 50% / 50%
Mix, DVI and SDI inputs 10 SDI 100% DVI 1:1 MagniPort SDI input SDI 525 Off Black 50% / 50%
NOTES :
(1) Factory preset default memories are hard coded. However, user can modify all 11 memories setting to suit their applications. The modified memories are save separately in
non-volatile locations.
(2) Underscan mode: The full graphics screen will be resized to fit in 92%, in both horizontal and vertical directions, of the output video screen.
(3) MagniPort with a window size of 720x480 within the graphics screen to be converted to a full or underscan NTSC/ 525 video output.(720x576 for PAL /625 Standard)
(4) REF-IN input can be either a Color Black (Black Burst) or a Composite signal.
(5) Outputs automatically genlock to the selected video input
(6) Factory default standard with no video input is set to 525 (NTSC). It can change to 625 (PAL) during initial setup. It can also be set from MENU to “Default to NTSC or
Default to PAL”. The standard always follows the genlock source, and auto switch between 625/PAL and 525/NTSC.
(7) With no input signal, will reference to default standard.
(8) Filters and Key settings: Input Filter: Reduced Flicker, H Filter: On, Key Edge Filter: Soft, Key Width: Wide, Key Range: 25.
(9) BLK (black) key color for Standard Key and WHT (white) represents transparent key color.