MCP-601 Operator’s Manual
Magni Systems, Inc.
79
12. APPENDIX
A. Connector Pin-outs
This chapter identifies and describes the connector pin outs on the MCP-601.
DVI Connector
Pin Description
Pin
Description
Pin
Description
1
T.M.D.S. Data2-
9
T.M.D.S. Data1-
17
T.M.D.S. Data0-
2
T.M.D.S. Data2+
10
T.M.D.S. Data1+
18
T.M.D.S. Data0+
3
T.M.D.S. Data2/4 Shield
11
T.M.D.S. Data1/3 Shield
19
T.M.D.S. Data0/5 Shield
4
Not used
12
Not used
20
Not used
5
Not used
13
Not used
21
Not used
6
DDC Clock
14
+5V Power
22
T.M.D.S. Clock Shield
7
DDC Data
15
Ground (for +5V)
23
T.M.D.S. Clock+
8
No Connect
16
Hot Plug Detect
24
T.M.D.S. Clock-
Figure A-1, DVI Connector viewed directly at the rear panel
NOTE:
The actual DVI connector in the instrument is a 29 pin DVI-I combined connector that includes the physical pins
for the digital and analog signals. The MCP-601 only used the DIGITAL portion of the connector. Furthermore,
only one digital channel is being connected. Pins 4,5,12,13,20 and 21 are for the second digital channel.